Action Blueprinting DVD 
Item #: DVD001
2 DVD's/4 Hrs. No other video ever made, comes close to this Hi-tech in depth look at what is involved to blueprint an action. It reveals the inherent gross misconceptions of action truing with facts and dial indicators. All machining is single point, including the recutting of the threads. An in-depth instruction section on setup of the threading tool bit and how to pickup the internal thread in an action for recutting for professional truing of threads. The setup of actions in this video are explained in depth, then shown with dial indicators.
$58.00
Defensive Edge - A 'How To' Guide For Long Range Hunting 
Long range hunting is the ultimate instructional DVD for the long range hunter. This DVD contains instruction on long range hunting, video clips of long range parctice shots and footage from some of our recent hunts.
You will see Defensive Edge pro staff shooters making unbelievable shots out to 1700 yards!! There is long range hunting footage including Defensive Edge Inc. owner and head instructor Shawn Carlock's shot on a great black bear at 1018 yards.
Learn the setup, the equipment and the skills for making that first round, long range hits in the field.
$39.95
Bolt Sleeving DVD 
Item #: DVD002
2 DVD's / 2 Hrs. 30 mins. The start of this video shows the bolt lug deflection off of the receiver lug. This when seen, will open your eyes to the next step in accurizing. Also it makes it easy to understand and explain to your customers. Next the use of the action bolt bore reamer/mandrel is shown and demonstrated on an action that is being blue printed and double sleeves on the bolt. Then the nitty gritty of sleeving a bolt body. All setups for machining are shown from the start to finish on the bolt. A double sleeve is what is installed, and how to setup so the firing pin hole is held dead center of the chamber.
$55.00
Tailstock Alignment DVD 
Item #: DVD003
1 DVD / 50 mins. There is a required alignment procedure for tailstocks. To achieve repeatability when moving the tailstock for depth of cut, like head space readings, the tailstock has to come back into axial alignment when slide back up the barrel for resuming the reaming operations. This video shows how to dial in the tailstock along with the why the turning of a shaft for alignment is fighting and ruining all your efforts for flawless precision in the chamber reaming operation.
$41.00
Sako Extractor DVD 
Item #: DVD004
1 DVD / 1 Hr. 59 mins. This video covers installation of all styles of Sako extractors, that can be used for all suppliers. It covers set up and machining of the bolt. It also covers problems associate with this style of extractor and what to do and not to do to extractor to through the case out, not up at the scope.
$25.00
G.T.R. High Pressure Pump DVD 
Item #: DVD005
1 DVD / 2 Hrs. Whether you purchased a flushing system from G.T.R. or built your own. You will want this full information video, which will save you time & money. Topics covered in this DVD include: high pressure pumps, motors, fittings, pressure relief valves, coolant tanks, tubing , line routing, accessory manifolds, motor mount fixtures for pump & motor, lathe chip pan prep, reamers (piloted and unpiloted, as well as carbide), cutting fluids, water-sol oil, mineral oil.
$31.00
All Hogs Go to Heaven DVD 
Item #: DVD006
A North East Varmint Video filmed in 2006. Join Rich Gregorchik and Jamie Dodson on their quest for The Varmint Hunters Association's 500 Yard Club. See some long range shooting at its finest using all stockfactory guns. Learn some tips and techniques, and see some absolutely awesome hits! All filmed with high resolution cameras for the best video quality possible! DVD 55 minutes.
$10.49
All Hogs Go to Heaven II DVD
Item #: DVD007
After 3 years of filming and applying everything we learned from our first video, we hope this north east varmint hunting video will set the standard for a long time to come. Packed with tons of tips and techniques and filmed with the best gear on the planet including Canon HD Wide screen camera's and a Schnieder Optics 1.6 optical multiplyer - custom made and a prototype at the time. Allowing us to film in pure HD at 36X. Join us as we try to learn the art of long range and stretch things out to beyond half a mile. 110 Minutes DVD
$19.99
Chambering A Championship Match Barrel
Item #: DVD008
A professional DVD produced by Grizzly Industrial featuring Gordy Gritters and the new Grizzly Gunsmith's Lathe that Gordy helped design. Provides step by step instructions in chambering a rifle barrel including: dialing in the barrel, threading the barrel, crowning the muzzle, etc.
$59.95
Evaluating Rifles For Accuracy Problems 
Item #: DVD009
1 DVD / 2 Hrs. & 35 Min. In this intensive video, Gordy thoroughly explains rifle accuracy, the problems that cause poor accuracy, and shows how to completely evaluate/measure/gauge every aspect of a factory or custom rifle for accuracy problems. He shows how to "slug" a bore to evaluate internal barrel problems, and has some terrific borescope footage that clearly shows crooked/off-center chambers, smeared lands caused by dull chamber reamers, chamber and throat "reamer chatter", throat erosion, and other accuracy robbing problems. Gordy then goes into detail explaining some of the best procedures used to correct all the accuracy problems in the action, barrel, stock, bedding, trigger, and other components of a rifle, including the "Big Five" things that are absolutely essential to bring out the full accuracy potential in any rifle. 2 Hrs./35 Min.
$49.95