BTS Chamber Flushing System

This adapter is designed for the gunsmith with smaller lathes, it allows fluid to continuously lubricate from the end of the barrel. This results in a cooler cutting surface with removed metal fragments that reduces the possibility of damage caused by metal chips.

Perfect if your chambering method is to mount the barrel through the spindle bore, and indicate the chamber end at the chuck, with the muzzle out the rear of the spindle with a spider. The BTS mounts on the last 1.250 inches of the muzzle end of the barrel and works on barrels from 1/4 " to 1.3" and .17 through .50 cal. with no extra parts. It only takes about 15 seconds to install this unit just works!